OPTIMISED CAPACITY
• Six load-bearing layers increase the WLL without increasing the sling width.
• A WLL range from 3 to 28 tonnes.
6-PLY FLAT WEBBING SLING
Increase capacity without increasing width
With six load-bearing layers, this flat webbing sling takes textile lifting capacity further. Adding layers increases the working load limit without increasing the sling width, keeping the sling compact.
PRODUCT BENEFITS
COMPACT DESIGN
• Higher capacity within a limited width.
• Easier fitting through lifting accessories and simpler positioning.
• Webbing widths from 30 to 300 mm.
PROTECTED TRACEABILITY
• Identification label sewn inside the eye.
• Reduced risk of the label being torn off during lifting and handling.
• Reinforced single eyes with protective sleeves.
At the same width,
capacity increases
An example with a webbing width of 30 mm :
2-ply
WLL 1 t
Width: 30 mm
4-ply
WLL 2 t
Width: 30 mm
6-ply
WLL 3 t
Width: 30 mm
Technical catalogue comparison: 1 t, 2 t and 3 t for the illustrated configurations, each with a webbing width of 30 mm.
Technical Specifications
Hover or tap the + indicator to discover each component.
Six webbing layersSix load-bearing layers increase the WLL without increasing the sling width.
Protected identification labelThe identification label is sewn inside the eye to reduce the risk of it being torn off.
Reinforced eyesSingle eyes with protective sleeves.Up to 28 tonnes WLL with a webbing width of just 300 mm.
| WLL | 3 to 28 tonnes |
|---|---|
| Length | 3 to 20 m |
| Webbing width | 30 to 300 mm |
| Eye type | Reinforced single eyes with protective sleeves |
| Options | Webbing marking, sliding PVC or Grizzly® sleeves, label protection |
Product reference format
F {WEBBING WIDTH} 1 {LENGTH}
Example: F 150 1 10
6-layer sling, 150 mm webbing width, 15 t WLL, category 1 single eye, 10 m length.
Applications across a wide range of sectors
And yours: tell us about your application and the specifications you need.